Description
- Multi-component automatic buffer that regulates pH for a more stable aquarium
- Helps increase pH stability by raising the alkalinity.
- Provides a good source of carbonates.
- Free of phosphates silicate & organic material.
- Made in the USA.
Alkalin8.3 & Alkalin8.3-P Instructions
Overview
- Raises alkalinity, adjusts pH to 8.3
-
Unlike single component KH products such as sodium carbonate, Alkalin 8.3 is a multi-component automatic buffer that regulates pH and its use makes for a much more stable aquarium. Eliminates pH and KH instability caused by poor salt mixes and ineffective buffering products. Highly-effective alkalinity(KH)-increasing (”buffer”) solution.
-
Helps increase pH Stability in an aquarium by raising the alkalinity.
-
Provides a source of carbonates, which make up the majority by weight of aragonite, the mineral secreted by reef-building organisms as skeletal material.
-
Continued addition raises pH until 8.3 is reached, at which point the pH remains unchanged and the alkalinity alone increases.
-
Over 50% stronger than most competing products.
-
Free of phosphates, silicate, and organic material.
- Formulated by a marine scientist
Technical Background
Alkalinity, also referred to as carbonate hardness or buffering capacity, is essentially a means of quantifying the stability of pH in a solution, such as aquarium water. Alkalinity is of extreme importance in a marine aquarium, owing to the manner in which it influences pH. In an aquarium, weak acids formed by oxygen respiration and the decomposition of organic material gradually deplete alkalinity. If left unchecked, the alkalinity drops below a critical level and pH begins to fluctuate more wildly than is normally suggested (a daily pH shift of +/-0.2 is normal in marine aquaria), causing stress to livestock. Alkalinity is also depleted by reef-building organisms during the production of aragonite (~60% carbonates by weight), and is therefore very important for their rapid growth.
Maintaining the alkalinity in marine aquaria between 7.5 - 9.5 dKH (2.7 - 3.4 meq/L) will generally maintain pH within the desired range. The rate at which alkalinity is depleted in a reef aquarium is determined by the stocking density of reef-building livestock, type of lighting, rate of water circulation, and other biological, physical, and chemical conditions; therefore, each aquarium will have different requirements for the rate of alkalinity supplementation. Once the rate of alkalinity depletion in the aquarium has been determined, the proper dosing rate of this product can be easily calculated. It is recommended that a quality salt mix with the proper (not augmented) alkalinity and concentrations of major, minor, and trace elements be used to establish natural seawater parameters in the reef aquarium, providing a stable ionic foundation on which to build. For additional information on alkalinity and other important aspects of marine chemistry for marine aquaria.
All Brightwell Aquatics liquid water care supplements are made with purified water and high purity materials. We develop formulae for aquaria based on empirical data, using observation and measurement rather than theory.
Instructions and Guidelines for Alkalin8.3 Liquid (Powder Below)
Basic: Shake product well before using. Add product at the maximum rate of 5 ml (1 capful) per 30 US-gallons daily until the desired alkalinity is attained, then dose daily or weekly as needed (see below) to maintain alkalinity between 7 - 12 dKH. When used in this fashion, 250 ml treats up to 1,500 US-gallons (5,678 L).
Advanced: Determine the alkalinity in the aquarium using an accurate test kit before supplementing. Shake product well before using. Each ml of Brightwell Aquatics Alkalin8.3 will increase the alkalinity in 1 US-gallon (3.785 L) of water by 3.1 dKH (1.1 meq/L). If the initial alkalinity in the aquarium is below 7 dKH (2.5 meq/L), add this product at the maximum rate of 5 ml per 10 US-gallons daily until the desired alkalinity is attained, then dose daily or weekly as needed (see below). For minor adjustments to alkalinity, add 5 ml (1 tsp) of Alkalin8.3 per 30 US-gallons of aquarium water as needed to maintain the alkalinity within the proper range. Always try to maintain the alkalinity within a range of +/-1 dKH. To determine the rate of alkalinity depletion once the desired alkalinity has been acquired, measure the alkalinity at the same time each day over a one- to two-week period. To determine the daily dosing rate (preferable to weekly dosing) for alkalinity maintenance: estimate the volume of water in the entire aquarium system; divide the daily decrease in alkalinity by 3.1 (when measuring alkalinity by dKH; divide by 1.1 when measuring by meq/L); multiply this number by the volume of water in the system to get the daily dosage required (ml) to maintain a stable alkalinity. Daily dosing maintains a more stable alkalinity and pH (and a more natural environment) than dosing weekly, in which the alkalinity spikes just after dosing and then gradually decreases throughout the course of the week.
Problem pH Aquariums: Aquaria with low circulation at the water’s surface, or in which a CO2-injected calcium reactor is being employed, or which are placed in an enclosed room with human and animal inhabitants (giving off CO2 into the air), often have a depressed pH due to carbon dioxide build up. Boost pH+ can help overcome this along with other measures, such as providing outside air to the skimmer intake port or other methods to control CO2 and bring pH in the aquarium back into a higher desired range without raising alkalinity to an unacceptable level. Use Boost pH+ as directed and do not exceed a pH value of 8.5, because pH at 8.6 or higher may be stressful and/or damaging to sensitive aquairum inhabitants. Additionally, changes to pH should be made very gradually, again to avoid stressing aquarium inhabitants. See suggestions for adjusting alkalinity below. It is not unusual for pH to fluctuate throughout the course of 24-hours between seemingly wide-ranging values (i.e. lower at night higher during the middle of the day); this is a natural occurrence that is caused by changes in the rates of photosynthesis between dark and light periods. If pH levels are seen to be constantly below the desired level and alkalinity is within the proper range, then the addition of Boost pH+, this product, may be very helpful.
Caution: Contains carbonate and bicarbonate salts; harmful if swallowed. If swallowed: give water, get medical attention. May cause eye or skin irritation. If in eyes, flush with water for 15 minutes, get medical attention. If on skin, wash thoroughly with water. Keep out of reach of children. Not for human consumption.
Ingredients
Purified water, inorganic Bicarbonate, Carbonate, Sulfate, Borate salts, proprietary ingredients
Instructions and Guidelines for Alkain8.3-P
Basic: Dissolve 2 grams (~½ teaspoon) of product per 20 US-gallons of aquarium water in 8-fl. oz. of fresh water; add every other day or as needed to maintain the alkalinity within a range of 7 - 12 dKH. When used in this fashion, 1,000 g treats up to 10,000 US-gallons (37,854 L).
Advanced: Determine the alkalinity in the aquarium using an accurate test kit before supplementing. Each g of Alkalin8.3-P will increase the alkalinity in 1 US-gallon (3.785 L) of water by 12 dKH (4.2 meq/L).]
EZ Calculations: For dKH: Multiply tank capacity in gallons x dKH increase desired x .089 = grams of product to add. Example to raise the alkalinity by 1.2 dKH in a 50 gallon tank the calculation is: 1.2 x 50 x 0.089 = 5.35 grams or 1 teaspoon. For meq/L: Multiply tank capacity in gallons x meq/L increase desired x .25 = grams of product to add. Example to raise the alkalinity by 0.5 meq/L in a 50 gallon tank the calculation is: 0.5 x 50 x 0.25 = 6.25 grams or 1.2 teaspoons.
Problem pH Aquariums: Aquaria with low circulation at the water’s surface, or in which a CO2-injected calcium reactor is being employed, or which are placed in an enclosed room with human and animal inhabitants (giving off CO2 into the air), often have a depressed pH due to carbon dioxide build up. Boost pH+ can help overcome this along with other other measures, such as providing outside air to the skimmer intake port or other methods to control CO2 and bring pH in the aquarium back into a higher desired range without raising alkalinity to an unacceptable level. Use Boost pH+ as directed and do not exceed a pH value of 8.5, because pH at 8.6 or higher may be stressful and/or damaging to sensitive aquairum inhabitants. Additionally, changes to pH should be made very gradually, again to avoid stressing aquarium inhabitants. See suggestions for adjusting alkalinity below. It is not unusual for pH to fluctuate throughout the course of 24-hours between seemingly wide-ranging values (i.e. lower at night higher during the middle of the day); this is a natural occurrence that is caused by changes in the rates of photosynthesis between dark and light periods. If pH levels are seen to be constantly below the desired level and alkalinity is within the proper range, then the addition of Boost pH+, this product, may be very helpful.
Caution: Contains carbonate, borate and bicarbonate salts; harmful if swallowed. If swallowed: give water, get medical attention. May cause eye or skin irritation. If in eyes, flush with water for 15 minutes, get medical attention. If on skin, wash thoroughly with water. Keep out of reach of children. Not for human
consumption.
Ingredients
Inorganic salts of carbonate, bicarbonate, sulfate, borate salts, & proprietary ingredients.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Refund Policy
We do not have a return policy on unopened products, but you may be eligible for a free exchange if the product is defective, damaged, is the wrong item, or not working as intended.
If there is a mistake on the order (wrong product, wrong product size, wrong shipping address), please contact us as soon as possible. If we are contacted and notify the factory before shipment, you might be eligible for a refund.
To start a return or refund, you can contact us at orders@brightwellaquatics.com. If your return or refund is accepted, we’ll send you instructions on what to do next. Always refer to these instructions.
You can always contact us for any return or refund questions at orders@brightwellaquatics.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
We do not accept returns on products that have been used unless there is proof that product is not working as intended when used as directed. Please get in touch if you have questions or concerns about your specific item.
Exchanges
The safest way to ensure you get what you want is to refer to the information we provide via email during the exchange process. Follow the steps given to receive your item(s).
Refunds
If a refund is approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund.